PIC Vietnam

PIC Vietnam (http://www.picvietnam.com/forum/index.php)
-   English forum on PICs (http://www.picvietnam.com/forum/forumdisplay.php?f=53)
-   -   Robocon 2007 (http://www.picvietnam.com/forum/showthread.php?t=627)

Khách 20-10-2006 11:17 PM

No Beop , u can give the automatic machines blockes :), i will use an infrared tx,rx , when i finish putting the blocks to the manual machine , i will press start to let the automatic machine move ;) .

Ahmed,Egypt

Khách 30-10-2006 08:40 AM

Hi, i need some help please , can i let the automatic robot at the start of the game to not start moving and stay statinoary ??

thanks alot

ahmed, egypt

falleaf 30-10-2006 11:17 AM

Of course, you can!

If y r worry about it, take a note that after 2 minutes and 50 second, a motor will turn a CAM (below the robot), and make the robot move few mm from its old pose.

Vietnamese team did so, in 2003.

Khách 31-10-2006 12:07 AM

hey, thanks , but i wanna tell ya the idea :-)
i wanna let the robot be at the start game cuz i will let the manual robots load the blocks ;) the above idea :D ...

Ahmed, Egypt.

bien_van_khat 01-11-2006 10:50 PM

Trích:

Nguyên văn bởi Khách (Post 5665)
No Beop , u can give the automatic machines blockes :), i will use an infrared tx,rx , when i finish putting the blocks to the manual machine , i will press start to let the automatic machine move ;) .

Ahmed,Egypt

Any kind of communication among your robots is prohibited even among the automatic robots. If you want to do so, i think your automatic robot must be able to sense the block when it is put.

Trích:

Hi, i need some help please , can i let the automatic robot at the start of the game to not start moving and stay statinoary ??
I think you can, i found no rules prohibit this.

KhachE 02-11-2006 11:33 AM

thanks alot :), hmm i dont know how to log in really : ( ... but its ok .

Ahmed , Egypt


Múi giờ GMT. Hiện tại là 01:11 AM.

Tên diễn đàn: vBulletin Version 3.8.11
Được sáng lập bởi Đoàn Hiệp.
Copyright © PIC Vietnam