[nhctdhbk]

đay là đoạn code mình tìm thấty ở trên mạng cho cái sơ đồ mà bạn badandan đã đưa ra. tuy nhiên khi mo phỏng bằng protues mình thấy led ko hiển thị được. Bác nào pro xem giúp sai ở chỗ nào cái?
#include <16F676.h>
#device adc=10
#fuses INTRC_IO,NOWDT,PUT,NOPROTECT,BROWNOUT,NOMCLR
#use delay (clock=4000000) // 4MHz clock

#rom 0x3ff={0x3444}

#byte PORTA = 0x05
#byte PORTC = 0x07
#byte TRISA = 0x85
#byte TRISC = 0x87

#define SPORTA PORTA
#define SPORTC PORTC

#define TICKS_BETWEEN_INTERRUPTS 5000 //5000
#define INTERRUPT_OVERHEAD 35
#define TMR1RESET (0xFFFF-(TICKS_BETWEEN_INTERRUPTS-INTERRUPT_OVERHEAD))

const char SegCode[11] = {0x40,0x57,0x22,0x06,0x15,0x0C,0x08,0x56,0x00,0x04 ,0xFF};
// 0 1 2 3 4 5 6 7 8 9
const char Column[3] = {0x02,0x01,0x04};
static char Segment[3] = {0x7f,0x7f,0x7f};
static unsigned char ColCount=0x00;

void CPU_SETUP(void);
void Display(void);
void HTO7S(unsigned int32 Num);

byte i;
unsigned int32 result;

#INT_TIMER1
void Timer1(void)
{
set_timer1(TMR1RESET);
Display();
}

void main()
{
unsigned char i;

CPU_SETUP();

while(true)
{
result=0;
for (i=0;i<20;i++)
{
set_adc_channel(3);
delay_ms(1);
result=result+read_adc();
}
//result = 0x3fe;
HTO7S(result/20);
delay_ms(200);
}

}

void CPU_SETUP()
{

setup_comparator(NC_NC_NC_NC); // not use comparator module
setup_adc_ports( sAN3 | VSS_VDD);
setup_adc(ADC_CLOCK_DIV_64);
TRISA=0b00011000;
PORTA=0x27;
TRISC=0b00000000;
PORTC=0x37;


setup_timer_1(T1_INTERNAL|T1_DIV_BY_1);
set_timer1(TMR1RESET);
enable_interrupts(GLOBAL);
enable_interrupts(INT_TIMER1);
}

//-------------------------------------
// Display routine
//-------------------------------------
void Display()
{
PORTA = 0b00100111; // off all digits column and Segment G
PORTC = 0b00111111; // off segment a-f
delay_cycles(2);


if (ColCount>=3)
ColCount=0;

SPORTC = Segment[ColCount];
SPORTA = ((Segment[ColCount] & 0b01000000)>>1) | (Column[ColCount]^0x07);
ColCount++;
}

//--------------------------------------
// Convet HEX 2 byte to 7-Segment code
//--------------------------------------
void HTO7S(unsigned int32 Num)
{

unsigned int32 res;


Segment[0]=SegCode[30*Num/10230];
if (Segment[0]==0x40)
Segment[0]=0xFF;

res = 30*Num%10230;
Segment[1]=SegCode[10*res/10230];
res=10*res%10230;
Segment[2]=SegCode[10*res/10230];
}