[hoahiep1959]

tôi viết 1 đoạn code cho Pic18f4431 giao tiep Isd4002 bằng PICC nhưng nó không chạy.Tôi dùng driver cua con ISD4002 có sẳn trong PICC.ai có kinh nghiệm coi thử giùm tôi viết đúng ko? cảm ơn anh em!

#include "C:\Program Files\PICC\Drivers\isd4003.c"
#int_RB
void RB_isr(void)
{
delay_ms(40);
disable_interrupts(INT_RB);
if (!input(PIN_B7))
{
output_d(0b10000000);
record_message(0b00000011) ;
delay_ms(40);
break;
}
if (!input(PIN_B6))
{
output_d(0b01000000);
play_message(0b00000011);
delay_ms(40);
break;
}
if (!input(PIN_B5))
{
output_d(0b00100000);

stop_message();
delay_ms(40);
break;
}
if (!input(PIN_B4))
{
output_d(0b00010000);


break;
}
enable_interrupts(INT_RB);
}



void main()
{

setup_adc_ports(NO_ANALOGS|VSS_VDD);
setup_adc(ADC_OFF|ADC_TAD_MUL_0|ADC_WHEN_INT0|ADC_ INT_EVERY_OTHER);
setup_spi(SPI_MASTER|SPI_L_TO_H|SPI_CLK_DIV_4);
setup_wdt(WDT_OFF);
setup_timer_0(RTCC_INTERNAL);
setup_timer_1(T1_DISABLED);
setup_timer_2(T2_DISABLED,0,1);
enable_interrupts(INT_RB);
enable_interrupts(GLOBAL);
//Setup_Oscillator parameter not selected from Intr Oscillator Config tab

// TODO: USER CODE!!
while(1)
{
output_d(0b00010000);
delay_ms(200);
output_d(0b00000000);
delay_ms(200);
}
}