[vanhoavh]

chào các bác.
hiện e đang làm đồ án vi xử lý về đo tốc độ động cơ bước. nhưng code chạy mãi mà ko được, em nhờ các bac coi dùm và chỉ giúp e với...gấp quá rồi

#include "E:\do an\do an cau truc may tinh\lab2\doan\main.h"
#include <LCD.C>
//#include <math.h> //dung cac ham toan hoc
#use delay(clock=20000000)
#use fast_io(a)
#use fast_io(b)
#use fast_io(c)
#use fast_io(d)
//==================khai bao ham con=============
int quetphim();
int checkphim(b);
void pwm();
void ghi_tocdo();
void ghi_thoigian();
void clear();
void read_rom();
//==================khai bao bien================
int8 i,t,a,b,c,d,sttphim,duty,ct,l,m;
int16 s_xung,s_vong,setpoint,error,luu,tg,tg1,dem;
//================ bien luu eeprom==============
int8 e0,e1,e2,e3,j,k;
int16 e;
//================chuong trinh quet phim==========
//quet phim so
int quetphim()
{
output_b(0xe0);// B4=0
a=0;
b=1;
checkphim(b);
if (a!=0)
{delay_ms(200);
return (sttphim);}
output_b(0xd0);// B5=0
a=0;
b=2;
checkphim(b);
if (a!=0)
{delay_ms(200);
return (sttphim);}
output_b(0xb0);// B6=0
a=0;
b=3;
checkphim(b);
if (a!=0)
{delay_ms(200);
return (sttphim);}
output_b(0x70);// B6=0
a=0;
b=4;
checkphim(b);
if (a!=0)
{delay_ms(200);
return (sttphim);}}
//============chuong trinh check phim=============
int checkphim(b)
{
switch (b)
{
case 1:
if(!input(pin_a0))
{sttphim=1;
a=1;}
else if(!input(pin_a1))
{sttphim=2;
a=1;}
else if(!input(pin_a2))
{sttphim=3;
a=1;}
else if(!input(pin_a3))
{ sttphim=10;//thuan
a=1;}
else {}
break;
case 2:
if(!input(pin_a0))
{sttphim=4;
a=1;}
else if(!input(pin_a1))
{sttphim=5;
a=1;}
else if(!input(pin_a2))
{sttphim=6;
a=1;}
else if(!input(pin_a3))
{sttphim=11;//nghich
a=1;}
else {}
break;
case 3:
if(!input(pin_a0))
{sttphim=7;
a=1;}
else if(!input(pin_a1))
{sttphim=8;
a=1;}
else if(!input(pin_a2))
{sttphim=9;
a=1;}
else if(!input(pin_a3))
{sttphim=12;//stop
a=1;}
else {}
break;
case 4:
if(!input(pin_a0))
{sttphim=0;//0
a=1;}
else if(!input(pin_a1))
{sttphim=15;//save
a=1;}
else if(!input(pin_a2))
{sttphim=14;//clear
a=1;}
else if(!input(pin_a3))
{sttphim=13;//set
a=1;}
else {}
break;}
return (sttphim);
}
// chuong trinh nhan xung tu encoder
//ngat ngoai, nhan xung tu encoder
#int_ext
void RB0_isr()
{
s_xung++;//dem so xung o chan RB0
}
//ngat timer1, tinh toan pwm va hien thi
#int_timer1
void timer1_isr()
{
set_timer1(-62500);
if (t==5){
S_vong=s_xung*2;//xung tren phut
//ht
lcd_gotoxy(1,1);
printf(lcd_putc," ");
if(ct==1)
{
lcd_gotoxy(1,1);
printf(lcd_putc,"TD_dat=%lu v/p",luu);}
else {
lcd_gotoxy(1,1);
printf(lcd_putc,"TG_dat=%lu s",tg);}
lcd_gotoxy(1,2);
printf(lcd_putc," ");
if (d==2)
{lcd_gotoxy(1,2);
printf(lcd_putc,"TD_tt=-%luv/p",s_vong);}
if (d==1)
{lcd_gotoxy(1,2);
printf(lcd_putc,"TD_tt= %luv/p",s_vong);}
//=========================
//xuat pwm
pwm();
//========================
s_xung=0;
s_vong=0;
t=0;
set_timer1(-62500);
}
else
t++;
set_timer1(-62500);
}
//ngat timer0, dat thoi gian
#int_timer0
void time0_irs()
{
set_timer0(-235);
if (dem>=tg1)
{
output_high(pin_e0);
delay_us(100);
output_low(pin_e0);
dem=0;
if (d==1)
{d=2;}
else if (d==2)
{d=1;}
else{}
set_timer0(-235);
}
else {
dem++;
set_timer0(-235);}
}
//chuong trinh chinh
void main()
{
i=0;
sttphim=0;
setpoint=0;tg=0;
duty=0;
c=0;
d=0;
ct=0;l=0;m=0;
e0=0;e1=0;e2=0;e3=0;e=0;k=0;
//=================================================
//===========
//1:ngo vao;0: la ngo ra
set_tris_b(0b00001111);//4 chan RB4-RB7 xuat du lieu ra ban phim
set_tris_a(0b00001111);//4 chan RA0-RA3 nhan du lieu tu ban phim
set_tris_c(0b00000000);//2 chan RC0 va RC1 xuat PWM
set_tris_D(0b00000000);//port D la port xuat du lieu ra LCD
//=================================================
//===========
setup_timer_1(T1_INTERNAL|T1_DIV_BY_8);
setup_timer_0(RTCC_INTERNAL|RTCC_DIV_256);
enable_interrupts(int_ext);//khoi dong ngat ngoai
ext_int_edge(H_TO_L); // xung tu cao xuong thap
enable_interrupts(global);// khoi dong bit ngat GIE
setup_timer_2(T2_DIV_BY_4,249,1);

setup_ccp1(CCP_PWM);
setup_ccp2(CCP_PWM);
set_pwm1_duty(0);
set_pwm2_duty(0);
//=================================================
//==========
lcd_init();
lcd_send_byte(0,0x01);
lcd_gotoxy(1,1);
printf(lcd_putc,"CHUONG TRINH DK ");
lcd_gotoxy(1,2);
printf(lcd_putc," TD DONG CO DC ");
delay_ms(1000);
lcd_gotoxy(1,1);
printf(lcd_putc," ");
lcd_gotoxy(1,2);
printf(lcd_putc," ");
read_rom();
lcd_gotoxy(1,1);
printf(lcd_putc,"CHON CHE DO :_ ");
while (true)
{
while (c==0)
{
quetphim();
if (a!=0)
{
if (sttphim==1)
{ ct=1;
c=1;
lcd_gotoxy(1,1);
printf(lcd_putc,"CHON CHE DO :_%u",ct);}
if (sttphim==2)
{ ct=2;
c=1;
lcd_gotoxy(1,1);
printf(lcd_putc,"CHON CHE DO :_%u",ct);}
}
}
if (ct==1)
{lcd_gotoxy(1,1);
printf(lcd_putc,"TD_dat=_ v/p");
lcd_gotoxy(1,2);
printf(lcd_putc,"TD_luu=%lu v/p",e);}
else {
lcd_gotoxy(1,1);
printf(lcd_putc,"TD_dat=_ v/p");
lcd_gotoxy(1,2);
printf(lcd_putc,"TG_dat=_ s");}
While (c==1)
{
quetphim();
if (a!=0)
{
if (sttphim>=0 && sttphim<=9)//ban phim tu 0--->9
{
if (m==0)
{ghi_tocdo();}
if((ct==2)&&(m==1))
{ghi_thoigian();}
}
if (sttphim==14)
{clear();}
if ((sttphim==13)&&(i==0)&&(e==0))
{
lcd_gotoxy(1,1);
printf(lcd_putc," ");
lcd_gotoxy(1,1);
printf(lcd_putc,"Phai nhap TD_dat");
delay_ms(1000);
lcd_gotoxy(1,1);
printf(lcd_putc," ");
lcd_gotoxy(1,1);
printf(lcd_putc,"TD_dat=_");
}
if ((sttphim==15)&&(i!=0)) //luu vao eeprom
{
write_eeprom(0,e0);
delay_ms(100);
write_eeprom(1,e1);
delay_ms(100);
write_eeprom(2,e2);
delay_ms(100);
write_eeprom(3,e3);
delay_ms(100);
write_eeprom(4,i);
delay_ms(100);
lcd_gotoxy(1,2);
printf(lcd_putc," ");
lcd_gotoxy(1,2);
printf(lcd_putc," LUU THANH CONG ");
}
if ((sttphim==13)&&((i!=0)||(e!=0)))
{
if (ct==1)
{
c=2;
if (e!=0 && i==0)
luu=e;}
if ((ct==2)&&(l>=2))
{
c=2;}
m=1;
}}}
while (c==2)
{
quetphim();
if(a!=0)
{
if(sttphim==10)
{
lcd_gotoxy(1,2);
printf(lcd_putc," ");
lcd_gotoxy(1,2);
printf(lcd_putc," QUAY THUAN ");
if (ct==2)
{enable_interrupts(int_timer0);
set_timer1(-235);}
enable_interrupts(int_timer1);
enable_interrupts(global);
set_timer1(-62500);
set_pwm1_duty(duty);
d=1;
}
if (sttphim==11)
{
lcd_gotoxy(1,2);
printf(lcd_putc," ");
lcd_gotoxy(1,2);
printf(lcd_putc," QUAY NGHICH ");
if (ct==2)
{enable_interrupts(int_timer0);
set_timer1(-235);}
enable_interrupts(int_timer1);
enable_interrupts(global);
set_timer1(-62500);
set_pwm2_duty(duty);
d=2;
}
if (sttphim==12)//stop
{
disable_interrupts(int_timer0);
set_timer0(0);
disable_interrupts(int_timer1);
set_pwm1_duty(0);
set_pwm2_duty(0);
lcd_gotoxy(1,2);
printf(lcd_putc," ");
lcd_gotoxy(1,2);
printf(lcd_putc," STOP ");
duty=0;
d=0;
}
if (sttphim==14)
{
clear();
c=0;
lcd_gotoxy(1,1);
printf(lcd_putc," ");
lcd_gotoxy(1,2);
printf(lcd_putc," ");
lcd_gotoxy(1,1);
printf(lcd_putc,"CHON CHE DO :_ ");
}}}}}
void pwm()
{
if ((luu>s_vong)&& duty<250)
{error=luu-s_vong;
if (error>1000)
duty=duty+50;
else if (error>100)
duty=duty+20;
else if (error>30)
{duty=duty+5;}
else if (error>20)
duty=duty+1.5;
else if (error>10)
duty=duty+(0.05*error);
else {duty=duty+(0.025*error);}
}
if (luu<(s_vong-2)&& (duty>0))
{error=s_vong-luu;
if (error>=10)
duty=duty-(0.05*error);
else (duty=duty-(0.02*error));
}
if(luu==s_vong)
duty=duty;
if((duty>=250)&&(luu>s_vong))
{ lcd_gotoxy(1,1);
printf(lcd_putc," ");
lcd_gotoxy(1,1);
printf(lcd_putc," TD_tt=MAX ");}
if (d==0)
{set_pwm1_duty(0);
set_pwm2_duty(0);}
else if (d==1)
{set_pwm1_duty(duty);
set_pwm2_duty(0);}
else
{set_pwm1_duty(0);
set_pwm2_duty(duty);}
}
//========chuong trinh con nhap toc do=======
void ghi_tocdo()
{
if(i>=0&&i<=3)
{
// giai thuat luu eeprom
if (i==0)
e0=sttphim;
else if (i==1)
e1=sttphim;
else if (i==2)
e2=sttphim;
else {e3=sttphim;}
//===============================
setpoint*=10;
setpoint+=sttphim;
i++;
lcd_gotoxy(1,1);
printf(lcd_putc," ");
lcd_gotoxy(1,1);
printf(lcd_putc,"TD_dat=%lu v/p",setpoint);
luu=setpoint;
}
else {
lcd_gotoxy(1,1);
printf(lcd_putc," ");
lcd_gotoxy(1,1);
printf(lcd_putc,"0<TD_dat<=9999");
delay_ms(1000);
lcd_gotoxy(1,1);
printf(lcd_putc," ");
lcd_gotoxy(1,1);
printf(lcd_putc,"TD_dat=%lu s",setpoint);
}}
//=========chuong trình con nhap thoi gian=========
void ghi_thoigian()
{
if(l>=0&&l<=3)
{
tg*=10;
tg+=sttphim;
l++;
lcd_gotoxy(1,2);
printf(lcd_putc," ");
lcd_gotoxy(1,2);
printf(lcd_putc,"TG_dat=%lu s",tg);
tg1=tg/0.12;
}
else {
lcd_gotoxy(1,2);
printf(lcd_putc," ");
lcd_gotoxy(1,2);
printf(lcd_putc," 0<TG_dat<=999 ");
delay_ms(1000);
lcd_gotoxy(1,2);
printf(lcd_putc," ");
lcd_gotoxy(1,2);
printf(lcd_putc,"TG_dat=%lu s",tg);
}}
//============chuong trinh con clear=========
void clear()
{
setpoint=0;
tg=0;
i=0;l=0;m=0;
e0=0;e1=0;e2=0;e3=0;
lcd_gotoxy(1,1);
printf(lcd_putc," ");
lcd_gotoxy(1,1);
printf(lcd_putc,"TD_dat=_");
lcd_gotoxy(1,2);
printf(lcd_putc," ");
lcd_gotoxy(1,2);
printf(lcd_putc,"TG_dat=_");
}
//=======chuong trinh con luu toc do vao epprom======
void read_rom()
{
k=read_eeprom(4);
for (j=0;j<k;j++)
{
e=e*10;
e=e+read_eeprom(j);
}}
//==========THE END========}

báo lỗi CCS la:

*** Error 71 "main.c" Line 509(0,1): Out of ROM, A segment or the program is too large MAIN