Robocon 2007

No Beop , u can give the automatic machines blockes , i will use an infrared tx,rx , when i finish putting the blocks to the manual machine , i will press start to let the automatic machine move .

Ahmed,Egypt

Hi, i need some help please , can i let the automatic robot at the start of the game to not start moving and stay statinoary ??

thanks alot

ahmed, egypt

[falleaf]

Of course, you can!

If y r worry about it, take a note that after 2 minutes and 50 second, a motor will turn a CAM (below the robot), and make the robot move few mm from its old pose.

Vietnamese team did so, in 2003.

hey, thanks , but i wanna tell ya the idea :-)
i wanna let the robot be at the start game cuz i will let the manual robots load the blocks the above idea ...

Ahmed, Egypt.

[bien_van_khat]

Nguyên văn bởi Khách

No Beop , u can give the automatic machines blockes , i will use an infrared tx,rx , when i finish putting the blocks to the manual machine , i will press start to let the automatic machine move .

Ahmed,Egypt

Any kind of communication among your robots is prohibited even among the automatic robots. If you want to do so, i think your automatic robot must be able to sense the block when it is put.

Hi, i need some help please , can i let the automatic robot at the start of the game to not start moving and stay statinoary ??

I think you can, i found no rules prohibit this.

thanks alot , hmm i dont know how to log in really : ( ... but its ok .

Ahmed , Egypt