23-11-2011, 03:52 PM | #4 |
Đệ tử 1 túi
Tham gia ngày: Sep 2010
Bài gửi: 18
: |
Chào bạn! Chương trình nháy led port C của bạn có thể như sau, bạn tham khảo:
Code:
// MCU : 16f887 // XTAL : 4MHz #include <htc.h> __CONFIG(XT & WDTDIS & LVPDIS & DEBUGDIS); __CONFIG(BORV21); #define _XTAL_FREQ 4000000 unsigned char count=0; //Ham main ******************************* void main(void){ ANSEL=0; //ALL PORTS ARE DIGITAL ANSELH=0; TRISC=0; PORTC=0; T0CS=0; //USE INTERNAL CLOCK PSA=0; //USE PRESCALER PS2=0; PS1=1; PS0=0; //1:8 T0IF=0; //Clear int flag T0IE=1; //Enable tmr0 int GIE=1; //Enable glb int TMR0=5; //Timer0 will overflow after: 8*250*1us = 2ms while(1); //Waiting for int } void interrupt isr(){ //Do not rename isr ("interrupt isr()") if(T0IE && T0IF){ T0IF = 0; TMR0=5; ++count; if(count == 125){ //125*2ms = 250ms count = 0; PORTC ^= 0xff; } } } thay đổi nội dung bởi: internet.com, 23-11-2011 lúc 04:05 PM. |
|
|