PIC Vietnam

Go Back   PIC Vietnam > Microchip PIC > Cơ bản về vi điều khiển và PIC > Những câu hỏi thường gặp

Tài trợ cho PIC Vietnam
Trang chủ Đăng Kí Hỏi/Ðáp Thành Viên Lịch Tìm Kiếm Bài Trong Ngày Ðánh Dấu Ðã Ðọc Vi điều khiển

Những câu hỏi thường gặp Những lỗi cơ bản thường gặp khi làm việc với PIC hoặc những vấn đề cơ bản nhất thường được hỏi trong những năm qua

 
 
Ðiều Chỉnh Xếp Bài
Prev Previous Post   Next Post Next
Old 23-09-2012, 09:17 AM   #1
convitcon1t
Nhập môn đệ tử
 
Tham gia ngày: Sep 2012
Bài gửi: 1
:
Unhappy hệ Thống báo cháy trong phòng

tình hình em mới học PIC,đang làm hệ thống thiết kế báo cháy đơn giàn,dùng CCS và dùng RTOS .em muốn ghi và đọc dữ liệu nhiệt độ vào EFROM để khi mất điện ta ko cần set lại , các bác xem giùm ^^, sao mà ko đọc hoặc ghi dc dữ liệu từ EF ROM ra,nhấn nút giá trị a ko tăng(em hiển thị giá trị a ra LCD)

#include <16F877A.h>
#include <def_16f877a.h>

#device pic16F877A*=16 ADC=8
const char code[10]={'0','1','2','3','4','5','6','7','8','9'} ;
const char t[4][21]={" HT DO NHIET DO ",
"NHIET DO PHONG: ",
" ",
" "};

int8 a,b;
int8 dv0,ch0,tr0,dv1,ch1,tr1;
int8 i;
int8 j,x;
int8 ADC0;
int8 count,d;

#fuses NOWDT,NOPROTECT,NOLVP,HS,NOPUT,NODEBUG, NOBROWNOUT,NOCPD, NOWRT
#use delay(clock=20000000)
#use rs232(baud=9600,parity=n,xmit=pin_C6,rcv=pin_C7)
#use rtos(timer=1, minor_cycle=100ms)

#define LCD portd
#define RS RC2
#define RW RC1
#define E RC0




void ghima()
{

RS=0;
RW=0;
E=1;
E=0;
delay_ms(10);
}
void hienthi()
{
RS=1;
RW=0;
E=1;
E=0;
delay_ms(10);

}
void khoitaoLCD()
{
portd=0x38;
ghima();
portd=0x0c;
ghima();
portd=0x01;
ghima();
portd=0x080;
ghima();

}

#task(rate=200ms, max=10ms, queue=1)
void UpandDown()
{ if(rtos_msg_poll()>0)
if(rtos_msg_read()==1)
{
a=read_eeprom(0x01);
if(rc6==0) // nhan nut UP
{
a=a++;

write_eeprom(0x01,a);
}
if(rc7==0) // nhan nut DOWN
{
a=a--;

write_eeprom(0x01,a);
}


}
}

#task(rate=500ms, max=100ms, queue=1)
void baodong()
{
PORTB=0x00;
if(rtos_msg_poll()>0)
{
x=rtos_msg_read();

tr1=(read_eeprom(0x01))/100;
ch1=((read_eeprom(0x01))-100*tr1)/10;
dv1=((read_eeprom(0x01))-100*tr1-10*ch1);

LCD=0xE5;
ghima();
LCD=code[tr1];
hienthi();

LCD=code[ch1];
hienthi();

LCD=code[dv1];
hienthi();


if(x >=(read_eeprom(0x01)))
{
portB=0xff;

LCD=0x9A;
ghima();
LCD='W';
hienthi();
LCD='A';
hienthi();
LCD='R';
hienthi();
LCD='N';
hienthi();
LCD='I';
hienthi();
LCD='N';
hienthi();
LCD='G';
hienthi();


}
else
{
portB=0x00;

LCD=0x9A;
ghima();
LCD=' ';
hienthi();
LCD=' ';
hienthi();
LCD=' ';
hienthi();
LCD=' ';
hienthi();
LCD=' ';
hienthi();
LCD=' ';
hienthi();
LCD=' ';
hienthi();

}
}
}

#task(rate=500ms, max=100ms, queue=1)
void LCDa()
{

if(rtos_msg_poll()>0)
{


b=rtos_msg_read();



tr0=b/100;
ch0=(b-100*tr0)/10;
dv0=(b-100*tr0-10*ch0);
}


LCD=0xD1;
ghima();
LCD=code[tr0];
hienthi();

LCD=code[ch0];
hienthi();

LCD=code[dv0];
hienthi();

LCD=0xD4;
ghima();
LCD='N';
hienthi();
LCD='H';
hienthi();
LCD='I';
hienthi();
LCD='E';
hienthi();
LCD='T';
hienthi();
LCD=' ';
hienthi();
LCD='D';
hienthi();
LCD='O';
hienthi();
LCD=' ';
hienthi();
LCD='C';
hienthi();
LCD='H';
hienthi();
LCD='A';
hienthi();
LCD='Y';
hienthi();
LCD=':';
hienthi();

}

#task(rate=500ms, max=100ms, queue=1)
void dulieu()
{ if(rtos_msg_poll()>0)
d=rtos_msg_read();
if(d==1)
{
set_adc_channel(0);
delay_us(10);
ADC0=read_ADC();

rtos_msg_send(LCDa,ADC0);
rtos_msg_send(baodong,ADC0);
}

}

#task(rate=1s, max=100ms, queue=1)
void nutnhan()
{

count=0;
if(re0==0)

count=1;

if(count==1)
{
setup_adc(ADC_clock_internal);

setup_adc_ports(RA0_RA1_ANALOG_RA3_REF);

trisd=0;
trisc=0;
set_tris_b(0);

khoitaolcd();
for(i=0;i<4;i++)
for(j=0;j<20;j++)
{
LCD=t[i][j];
hienthi();

if((j==19)&&(i==0))
{
LCD=0xc0; //dau dong 2
ghima();
}
if((j==19)&&(i==1))
{
LCD=0x94;
ghima();
}
if((j==19)&&(i==2))
{
LCD=0x44;
ghima();
}
}




rtos_msg_send(UpandDown,count);
rtos_msg_send(dulieu,count);
}


}




void main()
{
rtos_run();
}
convitcon1t vẫn chưa có mặt trong diễn đàn   Trả Lời Với Trích Dẫn
 

Ðiều Chỉnh
Xếp Bài

Quyền Sử Dụng Ở Diễn Ðàn
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is Mở
Smilies đang Mở
[IMG] đang Mở
HTML đang Tắt

Chuyển đến


Múi giờ GMT. Hiện tại là 06:55 PM.


Được sáng lập bởi Đoàn Hiệp
Powered by vBulletin®
Page copy protected against web site content infringement by Copyscape
Copyright © PIC Vietnam