PIC Vietnam

Go Back   PIC Vietnam > Microchip PIC > Cơ bản về vi điều khiển và PIC

Tài trợ cho PIC Vietnam
Trang chủ Đăng Kí Hỏi/Ðáp Thành Viên Lịch Tìm Kiếm Bài Trong Ngày Ðánh Dấu Ðã Ðọc Vi điều khiển

Cơ bản về vi điều khiển và PIC Những bài hướng dẫn cơ bản nhất để làm quen với vi điều khiển PIC

 
 
Ðiều Chỉnh Xếp Bài
Prev Previous Post   Next Post Next
Old 13-04-2014, 02:09 AM   #1
motu
Đệ tử 4 túi
 
Tham gia ngày: Oct 2007
Bài gửi: 79
:
Nhờ giúp đỡ về giao tiếp SPI

Chào các bác, e vừa mua 1con module LED7, mà ác cái nó xài MAX7219 để điều khiển, con này lại dùng giao tiếp SPI, e chưa thử bao giờ, vật lộn với nó cả ngày chẳng xong nên nhờ các bác giúp đỡ, code e test như sau:
Code:
#include <16F877A.H>
#include <def_877a.h>
#device *=16 ADC=8
#FUSES NOWDT, HS, NOPUT, NOPROTECT, NODEBUG, NOBROWNOUT, NOLVP, NOCPD, NOWRT
#use delay(clock=20000000)
#use fast_io(b)
#use fast_io(c)
#use fast_io(d)
#include <DS1820.c>
#include <Temperature.c>
#define Chip_Select PIN_C0        //RC0       Chip select

// Here we set the configuration of max7219.
void max7219_init1()
{
output_low(Chip_Select);       // SELECT MAX
SPI_write(0x09);                // BCD mode for digit decoding
SPI_write(0x00);
output_high(Chip_Select);       // DESELECT MAX

output_low(Chip_Select);       // SELECT MAX
SPI_write(0x0A);
SPI_write(0x0F);       // Segment luminosity intensity
output_high(Chip_Select);       // DESELECT MAX

output_low(Chip_Select);       // SELECT MAX
SPI_write(0x0B);
SPI_write(0x07);       // Display refresh
output_high(Chip_Select);       // DESELECT MAX

output_low(Chip_Select);       // SELECT MAX
SPI_write(0x0C);
SPI_write(0x01);       // Turn on the display
output_high(Chip_Select);       // DESELECT MAX

output_low(Chip_Select);       // SELECT MAX
SPI_write(0x00);
SPI_write(0xFF);       // No test
output_high(Chip_Select);       // DESELECT MAX
}

void main()
{
   SET_TRIS_C(0x00);
   setup_spi(spi_master|spi_l_to_h|spi_clk_div_16);
   Delay_ms(1000);
   max7219_init1();              // initialize  max7219.
   Delay_ms(1000);
   do                            // infinite loop.
   {
      output_low(Chip_Select);           // select max7219.
      SPI_write(0x02);           // send digit place.
      Delay_us(10);
      SPI_write(0x01);           // send value to max7219.
      output_high(Chip_Select);
   }
   while(1);                     // do forever.
}
Nó chẳng nhúc nhích gì cả, em test từng dòng lệnh thì thấy nó treo ngay lệnh SPI_write() đầu tiên, bác nào rành giao tiếp SPI giúp e với, đuối quá rồi. Thk các bác trước.
__________________
Dao nao cung la dao, dao cao dai cung la dao.
motu vẫn chưa có mặt trong diễn đàn   Trả Lời Với Trích Dẫn
 

Ðiều Chỉnh
Xếp Bài

Quyền Sử Dụng Ở Diễn Ðàn
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is Mở
Smilies đang Mở
[IMG] đang Mở
HTML đang Tắt

Chuyển đến


Múi giờ GMT. Hiện tại là 01:56 AM.


Được sáng lập bởi Đoàn Hiệp
Powered by vBulletin®
Page copy protected against web site content infringement by Copyscape
Copyright © PIC Vietnam