PIC Vietnam

Go Back   PIC Vietnam > Microchip PIC > dsPIC - Bộ điều khiển tín hiệu số 16-bit

Tài trợ cho PIC Vietnam
Trang chủ Đăng Kí Hỏi/Ðáp Thành Viên Lịch Tìm Kiếm Bài Trong Ngày Ðánh Dấu Ðã Ðọc Vi điều khiển

dsPIC - Bộ điều khiển tín hiệu số 16-bit Theo dự kiến của Microchip, vào khoảng năm 2011 dsPIC sẽ có doanh số lớn hơn PIC

 
 
Ðiều Chỉnh Xếp Bài
Prev Previous Post   Next Post Next
Old 20-10-2011, 05:18 PM   #1
vdtk3
Đệ tử 2 túi
 
Tham gia ngày: Jun 2007
Bài gửi: 30
:
Smile Bài học xương máu khi nạp dsPIC33FJ sài pickit2 !!!

Mình đang dùng mạch nạp pickit2 để nạp cho em dsPIC33FJ16GS... thì báo lỗi "Downloading programming executive .... FAILED" mặc dù vẫn nhận chíp bình thường. Mình đã phải mất hai ngày khốn khổ với em nó cuối cùng cũng có kết quả.
Trong file readme của pickit2 :
"""""""""""""""""""""""""""""""""""""""""""""""""" """""""""""""""""""""""""""""""""""""""""
"PICkit 2 now supports use of the Enhanced ICSP programming mode
using the Programming Executive (PE) for these devices. In
addition to faster programming times, use of the PE provides
the following:
PIC24H & dsPIC33F:
- Includes the Device ID corruption errata workaround
- Verify is done using a 16-bit CRC and is very quick
- Blank Check is done in the PE and is very quick
PIC24F:
- Verify is still done by reading out the device and
benefits from faster PE reads
- Blank Check is still done by reading out the device and
benefits from faster PE reads

The PE is never used for devices with < 4096 instruction
flash sizes.

Use of the PE may be disabled with programming reverting
to basic ICSP as used in previous releases as follows:
PIC24H & dsPIC33:
- Edit PICkit2.INI to set the following entry to 'N':
PE33: N
- To re-enable, edit the INI file and change the entry
back to 'Y'
- NOTE: Reverting to ICSP mode no longer protects against
the Device ID corruption errata
PIC24F:
- Edit PICkit2.INI to set the following entry to 'N':
PE24: N
- To re-enable, edit the INI file and change the entry
back to 'Y'
"""""""""""""""""""""""""""""
Nên để sửa lỗi trên mình đã phải sửa file pickit2.ini, disnable PE33. Thế là nạp ok !!!
Mong anh em nào gặp lỗi trên thì cứ sửa như mình đỡ mất thời gian.
vdtk3 vẫn chưa có mặt trong diễn đàn   Trả Lời Với Trích Dẫn
 

Ðiều Chỉnh
Xếp Bài

Quyền Sử Dụng Ở Diễn Ðàn
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is Mở
Smilies đang Mở
[IMG] đang Mở
HTML đang Tắt

Chuyển đến


Múi giờ GMT. Hiện tại là 01:33 AM.


Được sáng lập bởi Đoàn Hiệp
Powered by vBulletin®
Page copy protected against web site content infringement by Copyscape
Copyright © PIC Vietnam