PIC Vietnam

Go Back   PIC Vietnam > Truyền thông > Giao tiếp USB, CAN, I2C, SPI, USART...

Tài trợ cho PIC Vietnam
Trang chủ Đăng Kí Hỏi/Ðáp Thành Viên Lịch Bài Trong Ngày Vi điều khiển

Giao tiếp USB, CAN, I2C, SPI, USART... Những giao tiếp được tích hợp trên PIC

 
 
Ðiều Chỉnh Xếp Bài
Prev Previous Post   Next Post Next
Old 09-06-2011, 05:17 PM   #1
le van ngot
Đệ tử 1 túi
 
Tham gia ngày: Oct 2010
Bài gửi: 22
:
Pic18f giao tiếp màn hình cảm ứng

Mình dùng PIC8F4620 giao tiếp IC ADS7843 (chíp điều khiển miếng cảm ứng) con này giao tiếp qua chuẩn SPI. Đây là code mình viết ko biết sai chổ nào mà no ko chạy. mong các bạn chỉ giúp.

#include <18f4620.h>
#FUSES NOWDT //No Watch Dog Timer
#FUSES HS //High speed Osc (> 4mhz)
#FUSES NOPROTECT //Code not protected from reading
#FUSES NOBROWNOUT //Reset when brownout detected
#FUSES NOPUT //No Power Up Timer
#FUSES NODEBUG //No Debug mode for ICD
#FUSES NOLVP //No low voltage prgming, B3(PIC16) or B5(PIC18) used for I/O
#use delay(clock=20000000)
#define SPI_MODE_0 (SPI_L_TO_H | SPI_XMIT_L_TO_H)
////////////////////////////////////////////////////////////////////////////////
//////////////dinh nghia PIN/////////////////////
#define ADS7843_CS PIN_C1
#define ADS7843_BUSY PIN_C2
#define ADS7843_PENIRQ PIN_B0

////////////////////////////////////////////////////////////////////////////////
//////////////Cchuong trinh con/////////////////////

int16 ads7843_read(mode)
{
int8 lsb, msb;
int16 retval;

output_low(ADS7843_CS); //cho phep chon chip
spi_write(mode);

while (input (ADS7843_BUSY)== 1){;}
msb = spi_read(0);
lsb = spi_read(0);

output_high(ADS7843_CS); //khong phep chon chip

retval = make16(msb, lsb); // tra ve gia tri 16bit ket hop tu 2 bien (msb va lsb) msb la byte cao
retval >>= 4;
return(retval); //tra ve gia tri la: [x][x][x][x][x][x][x][x][x][x][x][x][] [] [] []
}
///////////////////////////////////////////////////////////////////////////////

void main()
{
output_high(ADS7843_CS); // Inactive state (disenable)
setup_spi(SPI_MASTER | SPI_MODE_0 | SPI_CLK_DIV_4); //khoi tao chuan SPI
int16 x,y;
output_low(ADS7843_CS); // Inactive state (enable)
delay_ms(5);

while (TRUE)
{
while( input(ADS7843_PENIRQ) ==0 ) // is screen touch
{
x = ads7843_read (0x98);
delay_us (2);
y = ads7843_read (0xD8);
delay_ms (1);
if ((x<50)&& (y <50)) //neu vung duoc bam co gtri x,y <50 thi bat den chi thi RB7
{
output_bit( PIN_B7, 1);
delay_ms (100);
output_bit( PIN_B7, 0);
delay_ms (50);
}
}
}
}
File Kèm Theo
File Type: zip test7843.zip (13.7 KB, 89 lần tải)
le van ngot vẫn chưa có mặt trong diễn đàn   Trả Lời Với Trích Dẫn
 


Quyền Sử Dụng Ở Diễn Ðàn
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is Mở
Smilies đang Mở
[IMG] đang Mở
HTML đang Tắt

Chuyển đến


Múi giờ GMT. Hiện tại là 09:20 PM.


Được sáng lập bởi Đoàn Hiệp
Powered by vBulletin®
Page copy protected against web site content infringement by Copyscape
Copyright © PIC Vietnam