22-12-2009, 05:06 PM | #1 |
Nhập môn đệ tử
Tham gia ngày: Nov 2008
Bài gửi: 5
: |
Ai sữa giùm em chương trình viết trên MikroC này với!!!
chương trình này em viết trên MikroC 8.2
Code:
void main() { PORTA = 0; // Initialize PORTA TRISA = 0; // Configure PORTA as output PORTB = 0; // Initialize PORTB TRISB = 0; // Configure PORTB as output PORTC = 0; // Initialize PORTC TRISC = 0; // Configure PORTC as output PORTD = 0; // Initialize PORTD TRISD = 0; // Configure PORTD as output while(1) { PORTA = ~PORTA; // toggle PORTA Delay_ms(1000); // one second delay PORTB = ~PORTB; // toggle PORTB Delay_ms(1000); // one second delay PORTC = ~PORTC; // toggle PORTC Delay_ms(1000); // one second delay PORTD = ~PORTD; // toggle PORTD Delay_ms(1000); // one second delay } } |
22-12-2009, 05:45 PM | #2 |
Đệ tử 3 túi
Tham gia ngày: Oct 2006
Bài gửi: 46
: |
Bạn chưa config cho portA, ko biết bạn dùng pic gì, bạn phải mắc thêm một điện trở kéo lên ở ra4. Chương trình của bạn mình thừ dùng cho pic16f877a sửa lại như sau:
Code:
void main() { ADCON1=0x06; //config porta thanh digital in/out PORTA = 0; // Initialize PORTA TRISA = 0; // Configure PORTA as output PORTB = 0; // Initialize PORTB TRISB = 0; // Configure PORTB as output PORTC = 0; // Initialize PORTC TRISC = 0; // Configure PORTC as output PORTD = 0; // Initialize PORTD TRISD = 0; // Configure PORTD as output while(1) { PORTA = ~PORTA; // toggle PORTA Delay_ms(1000); // one second delay PORTB = ~PORTB; // toggle PORTB Delay_ms(1000); // one second delay PORTC = ~PORTC; // toggle PORTC Delay_ms(1000); // one second delay PORTD = ~PORTD; // toggle PORTD Delay_ms(1000); // one second delay } }
__________________
http://www.hieunghia.info Lướt web thoải mái với USB3G của Viettel http://www.hieunghia.info/tin-cong-n...3g-vietel.html ----------------------------------------------------------------------------------- Một chút giận,hai chút tham,lận đận cả đời ri cũng khổ. Trăm điều lành,ngàn điều nhịn,thong dong tấc dạ rứa mà vui |
22-12-2009, 07:09 PM | #3 |
Nhập môn đệ tử
Tham gia ngày: Nov 2008
Bài gửi: 5
: |
cám ơn anh,em dùng con 877a,nó chạy tốt rồi.
|
22-12-2009, 10:02 PM | #4 |
Nhập môn đệ tử
Tham gia ngày: Nov 2008
Bài gửi: 5
: |
Code:
#include "Display_utils.h" unsigned short i; void main() { ADCON1=0x06; PORTA = 0; TRISA = 0; PORTD = 0; TRISD = 0; do { for (i = 0; i <= 9; i++) { PORTD = ~mask(i); // bring appropriate value to PORTD PORTA = 1; // turn on appropriate 7seg. display Delay_ms(1000); } } while (1); //endless loop } thay đổi nội dung bởi: bocon1903, 22-12-2009 lúc 10:24 PM. |
|
|