|  | 
| 
 | Tài trợ cho PIC Vietnam | ||||||||
| Bootloaders - Programmers - Debuggers - Emulators Những công cụ cần thiết để lập trình cho PIC/dsPIC | 
|  | Ðiều Chỉnh | Xếp Bài | 
|  17-12-2009, 03:27 PM | #19 | 
| Nhập môn đệ tử Tham gia ngày: May 2009 
					Bài gửi: 4
 : | //==================================================  ============== Connected to \\.\COM2 at 19200 HEX: 3 hours old, INHX8M,16Fcode, total=1380 bytes. Searching for PIC ... Found:16F 886/887 WARNING: GOTO not found in first 4 words! If using a compiler, maybe you should write some directive to enable the use of bootloaders, or maybe you could fix it by adding an interrupt handler to your program. WARNING: PCLATH not fully initialised before GOTO! ... could not repair !!!, Maybe you sould use some directive in your compiler to enable the use of bootloaders WRITE OK at 13:35, time:1.360 sec Connected to \\.\COM2 at 19200 HEX: 3 hours old, INHX8M,16Fcode, total=362 bytes. Searching for PIC ... Found:16F 886/887 WARNING: GOTO not found in first 4 words! If using a compiler, maybe you should write some directive to enable the use of bootloaders, or maybe you could fix it by adding an interrupt handler to your program. WRITE OK at 13:36, time:0.437 sec //================================================== ============= Bác nào đã dùng Bootloader cho PIC6F887 đã gặp lỗi này chưa ạ, bác nào có thể chỉ giáo cho mình để sửa lỗi này không vậy. | 
|   |   | 
| Ðiều Chỉnh | |
| Xếp Bài | |
| 
 | 
 |