|
Tài trợ cho PIC Vietnam |
Bootloaders - Programmers - Debuggers - Emulators Những công cụ cần thiết để lập trình cho PIC/dsPIC |
|
Ðiều Chỉnh | Xếp Bài |
17-12-2009, 03:27 PM | #19 |
Nhập môn đệ tử
Tham gia ngày: May 2009
Bài gửi: 4
: |
//================================================== ==============
Connected to \\.\COM2 at 19200 HEX: 3 hours old, INHX8M,16Fcode, total=1380 bytes. Searching for PIC ... Found:16F 886/887 WARNING: GOTO not found in first 4 words! If using a compiler, maybe you should write some directive to enable the use of bootloaders, or maybe you could fix it by adding an interrupt handler to your program. WARNING: PCLATH not fully initialised before GOTO! ... could not repair !!!, Maybe you sould use some directive in your compiler to enable the use of bootloaders WRITE OK at 13:35, time:1.360 sec Connected to \\.\COM2 at 19200 HEX: 3 hours old, INHX8M,16Fcode, total=362 bytes. Searching for PIC ... Found:16F 886/887 WARNING: GOTO not found in first 4 words! If using a compiler, maybe you should write some directive to enable the use of bootloaders, or maybe you could fix it by adding an interrupt handler to your program. WRITE OK at 13:36, time:0.437 sec //================================================== ============= Bác nào đã dùng Bootloader cho PIC6F887 đã gặp lỗi này chưa ạ, bác nào có thể chỉ giáo cho mình để sửa lỗi này không vậy. |
|
|