tiny bootloader for 16f887

**ngotuyen** · 17-12-2009, 03:27 PM

//================================================== ==============
Connected to \\.\COM2 at 19200
HEX: 3 hours old, INHX8M,16Fcode, total=1380 bytes.
Searching for PIC ...
Found:16F 886/887
WARNING: GOTO not found in first 4 words!
If using a compiler, maybe you should write some directive to enable the use of bootloaders, or maybe you could fix it by adding an interrupt handler to your program.
WARNING: PCLATH not fully initialised before GOTO! ... could not repair !!!,
Maybe you sould use some directive in your compiler to enable the use of bootloaders
WRITE OK at 13:35, time:1.360 sec

Connected to \\.\COM2 at 19200
HEX: 3 hours old, INHX8M,16Fcode, total=362 bytes.
Searching for PIC ...
Found:16F 886/887
WARNING: GOTO not found in first 4 words!
If using a compiler, maybe you should write some directive to enable the use of bootloaders, or maybe you could fix it by adding an interrupt handler to your program.
WRITE OK at 13:36, time:0.437 sec
//================================================== =============

Bác nào đã dùng Bootloader cho PIC6F887 đã gặp lỗi này chưa ạ, bác nào có thể chỉ giáo cho mình để sửa lỗi này không vậy.

17-12-2009, 03:27 PM	#19
ngotuyen Nhập môn đệ tử Tham gia ngày: May 2009 Bài gửi: 4 :	//================================================== ============== Connected to \\.\COM2 at 19200 HEX: 3 hours old, INHX8M,16Fcode, total=1380 bytes. Searching for PIC ... Found:16F 886/887 WARNING: GOTO not found in first 4 words! If using a compiler, maybe you should write some directive to enable the use of bootloaders, or maybe you could fix it by adding an interrupt handler to your program. WARNING: PCLATH not fully initialised before GOTO! ... could not repair !!!, Maybe you sould use some directive in your compiler to enable the use of bootloaders WRITE OK at 13:35, time:1.360 sec Connected to \\.\COM2 at 19200 HEX: 3 hours old, INHX8M,16Fcode, total=362 bytes. Searching for PIC ... Found:16F 886/887 WARNING: GOTO not found in first 4 words! If using a compiler, maybe you should write some directive to enable the use of bootloaders, or maybe you could fix it by adding an interrupt handler to your program. WRITE OK at 13:36, time:0.437 sec //================================================== ============= Bác nào đã dùng Bootloader cho PIC6F887 đã gặp lỗi này chưa ạ, bác nào có thể chỉ giáo cho mình để sửa lỗi này không vậy.